Show mvr traffic, Syntax, Parameter description – Dell POWEREDGE M1000E User Manual
Page 563: Default configuration, Command mode, User guidelines, Examples
Multicast VLAN Registration Commands
563
show mvr traffic
Use the show mvr traffic command in Privileged EXEC mode to display
global MVR statistics.
Syntax
show mvr traffic
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
The following table lists the completion messages.
Examples
The following table explains the output parameters.
Message Type
Message Description
Successful Completion Message
None
Error Completion Message
MVR disabled
Parameter
Description
IGMP Query Received
Number of received IGMP Queries.
IGMP Report V1 Received
Number of received IGMP Reports V1.
IGMP Report V2 Received
Number of received IGMP Reports V2.
IGMP Leave Received
Number of received IGMP Leaves.
IGMP Query Transmitted
Number of transmitted IGMP Queries.
2CSPC4.XModular-SWUM200.book Page 563 Thursday, March 10, 2011 11:18 AM