Dell POWEREDGE M1000E - Manual (Page 1381)

Line Commands 1377
Example
The following example displays the line configuration.
console>show line
Console configuration:
Interactive timeout: Disabled
History: 10
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
Telnet configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10
SSH configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10
speed
Use the speed command in Line Configuration mode to set the line baud
rate. Use the no form of the command to restore the default settings.
Syntax
speed { bps }
no speed
• bps — Baud rate in bits per second (bps). The options are 2400, 9600,
19200, 38400, 57600, and 115200.
Default Configuration
This default speed is 9600.
2CSPC4.XModular-SWUM200.book Page 1377 Thursday, March 10, 2011 11:18 AM