Default configuration, Command mode, User guidelines – Dell POWEREDGE M1000E User Manual
Page 1141: Example
Advertising
OSPF Commands
1141
Default Configuration
The default value for
delay-time
is 5. The default value for
hold-time
is 10.
Command Mode
Router OSPF Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures the SPF delay and hold time.
console(config-router)#timers spf 20 30
2CSPC4.XModular-SWUM200.book Page 1141 Thursday, March 10, 2011 11:18 AM
Advertising