Clear captive-portal users, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 1293: Command mode, User guidelines, Example, No user, Captive portal local user commands
Advertising
Captive Portal Commands
1291
Captive Portal Local User Commands
clear captive-portal users
Use the clear captive-portal users command to delete all captive portal user
entries.
Syntax
clear captive-portal users
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#clear captive-portal users
no user
Use the no user command to delete a user from the local user database. If the
user has an existing session, it is disconnected.
Syntax
no user
user-id
•
user-id
—User ID (Range: 1–128).
Default Configuration
There is no default configuration for this command.
2CSPC4.XModular-SWUM200.book Page 1291 Thursday, March 10, 2011 11:18 AM
Advertising