Show vlan association subnet, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 737: Command mode, User guidelines, Example, Show vlan, Association subnet
VLAN Commands
737
MAC Address
VLAN ID
-----------------------
-------
0001.0001.0001.0001
1
console#
show vlan association subnet
Use the show vlan association subnet command in Privileged EXEC mode to
display the VLAN associated with a specific configured IP-Address and
netmask. If no IP Address and net mask are specified, the VLAN associations
of all the configured IP-subnets are displayed.
Syntax
show vlan association subnet [
ip-address ip-mask
]
•
ip-address
— Specifies IP address to be shown
•
ip-mask
— Specifies IP mask to be shown
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The command has no user guidelines.
Example
The following example shows the case if no IP Subnet to VLAN association
exists.
console#show vlan association subnet
IP Address
IP Mask
VLAN ID
---------------- ---------------- -------
2CSPC4.XModular-SWUM200.book Page 737 Thursday, March 10, 2011 11:18 AM