Show lldp remote-device, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 545: Command mode, User guidelines, Examples
LLDP Commands
545
System Capabilities Enabled: bridge
Management Address:
Type: IPv4
Address: 192.168.17.25
—
— —
show lldp remote-device
Use the lldp remote-device command in Privileged EXEC mode to display
the current LLDP remote data. This command can display summary
information or detail for each interface.
Syntax
show lldp remote-device {detail
interface
|
interface
| all}
• detail — Includes detailed version of remote data.
•
interface
— Specifies a valid physical interface on the device. Substitute
gigabitethernet
unit/slotport
or tengigabitethernet
unit/slotport
}
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
These examples show current LLDP remote data, including a detailed
version.
console#show lldp remote-device
2CSPC4.XModular-SWUM200.book Page 545 Thursday, March 10, 2011 11:18 AM