Dell POWEREDGE M1000E - Manual (Page 1521)

Syslog Commands 1517
level
Use the level command in Logging mode to specify the severity level of syslog
messages. To reset to the default value, use the no form of the command.
Syntax
level level
no level
Parameter Description
Default Configuration
The default value for level is info.
Command Mode
Logging mode
User Guidelines
After entering the view corresponding to a specific syslog server, the
command can be executed to set the severity level for syslog messages.
Example
The following example sets the syslog message severity level to alert.
console(config-logging)#level alert
logging cli-command
Use the logging cli-command in Global Configuration mode to enable CLI
command logging.
Parameter Description
level The severity level for syslog messages. (Range: emergency, alert,
critical, error, warning, notice, info, debug)
2CSPC4.XModular-SWUM200.book Page 1517 Thursday, March 10, 2011 11:18 AM