Dell POWEREDGE M1000E - Manual (Page 1278)

1276 Captive Portal Commands
no https port
• port-num —The port number to monitor (Range: 1–65535).
Default Configuration
Captive portal only monitors port 443 by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#https port 1443
console(config-CP)#no https port
show captive-portal
Use the show captive-portal command to display the status of the captive
portal feature.
Syntax
show captive-portal
Default Configuration
There is no default configuration for this command
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
2CSPC4.XModular-SWUM200.book Page 1276 Thursday, March 10, 2011 11:18 AM