Dell POWEREDGE M1000E - Manual (Page 667)

RADIUS Commands 667
Example
The following example of the retransmit command specifies five retries.
console(config)#radius-server host 192.143.120.123
console(config-radius)#retransmit 5
show aaa servers
Use the show aaa servers command to display the list of configured RADIUS
servers and the values configured for the global parameters of the RADIUS
client.
Syntax
show aaa servers [accounting | authentication ] [name [ servername ]]
Parameter Description
Default Configuration
Authentication servers are displayed by default.
Command Mode
User EXEC, Privileged EXEC
User Guidelines
The following fields are displayed:
Parameter Description
accounting This optional parameter will cause accounting servers to be
displayed.
authentication This optional parameter will cause authentication servers to be
displayed.
name This optional parameter will cause the server names to be
displayed instead of the server configuration parameters.
servername Will cause only the server(s) with server-name name to be
displayed. There are no global parameters displayed when this
parameter is specified.
2CSPC4.XModular-SWUM200.book Page 667 Thursday, March 10, 2011 11:18 AM