Dell POWEREDGE M1000E - Manual (Page 1319)

Clock Commands 1317
Example
The following example displays the current SNTP configuration of the
device.
console#show sntp configuration
Polling interval: 64 seconds
MD5 Authentication keys:
Authentication is not required for synchronization.
Trusted keys:
No trusted keys.
Unicast clients: Disable
Unicast servers:
Server Key Polling Priority
--------- ----------- ----------- ----------
10.27.128.21 Disabled Enabled 1
show sntp server
Use the show sntp server command in Privileged EXEC mode to display the
pre-configured SNTP servers. The configured servers can be either IPv4 or
IPv6 format.
Syntax
show sntp server
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
2CSPC4.XModular-SWUM200.book Page 1317 Thursday, March 10, 2011 11:18 AM