Dell POWEREDGE M1000E - Manual (Page 615)

QoS Commands 615
Syntax
match class-map refclassname
no match class-map refclassname
• refclassname — The name of an existing DiffServ class whose match
conditions are being referenced by the specified class definition.
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
• The parameters refclassname and class-map-name can not be the same.
• Only one other class may be referenced by a class.
• Any attempts to delete the
refclassname class while the class is still
referenced by any class-map-name fails.
• The combined match criteria of class-map-name and refclassname must
be an allowed combination based on the class type.
• Any subsequent changes to the refclassname class match criteria must
maintain this validity, or the change attempt fails.
• The total number of class rules formed by the complete reference class
chain (including both predecessor and successor classes) must not exceed
a platform-specific maximum. In some cases, each removal of a refclass
rule reduces the maximum number of available rules in the class definition
by one.
Example
The following example adds match conditions defined for the Dell class to
the class currently being configured.
console(config-classmap)#match class-map Dell
The following example deletes the match conditions defined for the Dell
class from the class currently being configured.
2CSPC4.XModular-SWUM200.book Page 615 Thursday, March 10, 2011 11:18 AM