Altera Quartus II Settings File - Manual (Page 1046)

VCCA_R_USER_VOLTAGE
Specifies the default voltage of the VCCA_R power rail supply, which is applied if all transceivers on the
right side of the device are powered and unused. To configure a transceiver for your intended protocol,
use the ALTGX MegaWizard. Refer to the device datasheet for the current device family for more details.
Type
String
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
The value of this assignment is case sensitive.
This assignment is included in the Fitter report.
Syntax
set_global_assignment -name VCCA_R_USER_VOLTAGE <value>
1046 VCCA_R_USER_VOLTAGE
MNL-Q21005
2015.05.04
Altera Corporation Quartus Settings File Reference Manual
Send Feedback