Altera Quartus II Settings File - Manual (Page 795)

VCCPD_VOLTAGE
Specifies the default I/O Bank VCCPD Voltage to be used for pins on the target device.
Type
String
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
None
Syntax
set_global_assignment -name VCCPD_VOLTAGE -section_id <section identifier>
<value>
Default Value
3.3V, requires section identifier
MNL-Q21005
2015.05.04
VCCPD_VOLTAGE 795
Quartus Settings File Reference Manual Altera Corporation
Send Feedback