Mercury_config_device_jtag_user_code – Altera Quartus II Settings File User Manual
Page 235
Advertising
MERCURY_CONFIG_DEVICE_JTAG_USER_CODE
Specifies user-defined information about the configuration device. The JTAG user code is an extension of
the option register. This data can be read with the JTAG USERCODE instruction.
Old Name
CONFIG_DEVICE_JTAG_USER_CODE_DALI
Type
String
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
None
Syntax
set_global_assignment -name MERCURY_CONFIG_DEVICE_JTAG_USER_CODE <value>
Default Value
FFFFFFFF
MNL-Q21005
2015.05.04
MERCURY_CONFIG_DEVICE_JTAG_USER_CODE
235
Quartus Settings File Reference Manual
Altera Corporation
Advertising