Altera Quartus II Settings File - Manual (Page 602)

INCREASE_DELAY_TO_OUTPUT_ENABLE_PIN
Increases the propagation delay to the output enable pin from internal logic or the output enable register
implemented in an I/O cell. This is an advanced option that should be used only after you have compiled
a project, checked the I/O timing, and determined that the timing is unsatisfactory. For detailed
information on how to use this option, refer to the data sheet for the device family. This option is ignored
if it is applied to anything other than an output enable pin.
Type
Enumeration
Values
• Off
• On
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
This assignment supports Fitter wildcards.
Syntax
set_instance_assignment -name INCREASE_DELAY_TO_OUTPUT_ENABLE_PIN -to <to> -
entity <entity name> <value>
602 INCREASE_DELAY_TO_OUTPUT_ENABLE_PIN
MNL-Q21005
2015.05.04
Altera Corporation Quartus Settings File Reference Manual
Send Feedback