Enable_oct_done – Altera Quartus II Settings File User Manual
Page 215
Advertising
ENABLE_OCT_DONE
This option controls whether the INIT_DONE signal will be gated by OCT_DONE signal which indicates
the Power-Up OCT calibration is completed. If this option is turned off, the INIT_DONE signal is not
gated by the OCT_DONE signal.
Type
Boolean
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
This assignment is included in the Fitter report.
Syntax
set_global_assignment -name ENABLE_OCT_DONE <value>
MNL-Q21005
2015.05.04
ENABLE_OCT_DONE
215
Quartus Settings File Reference Manual
Altera Corporation
Advertising