Altera Quartus II Settings File - Manual (Page 1296)

SIMULATION_COVERAGE
Reports 'coverage,' that is, the ratio of output ports that toggle between 1 and 0 during simulation,
compared to the total number of output ports present in the netlist, expressed as a percentage.
Type
Boolean
Device Support
This setting can be used in projects targeting any Altera device family.
Syntax
set_global_assignment -name SIMULATION_COVERAGE <value>
Default Value
On
1296 SIMULATION_COVERAGE
MNL-Q21005
2015.05.04
Altera Corporation Quartus Settings File Reference Manual
Send Feedback