Altera Quartus II Settings File - Manual (Page 210)

DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE
Disables the nCS and OE internal pull-ups on the configuration device(s).
Old Name
DISABLE_CONF_DONE_AND_NSTATUS_PULLUPS_ON_CONFIG_DEVICE
Type
Boolean
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
This assignment is included in the Fitter report.
Syntax
set_global_assignment -name DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE
<value>
Default Value
Off
210 DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE
MNL-Q21005
2015.05.04
Altera Corporation Quartus Settings File Reference Manual
Send Feedback