Altera Quartus II Settings File - Manual (Page 224)

FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE
Allows an EPC1 or EPC1441 configuration device to operate in a 3.3-V environment.
Type
Boolean
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
This assignment is included in the Fitter report.
Syntax
set_global_assignment -name FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE
<value>
Default Value
Off
224 FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE
MNL-Q21005
2015.05.04
Altera Corporation Quartus Settings File Reference Manual
Send Feedback