Altera Quartus II Settings File - Manual (Page 512)

DQSOUT_DELAY_CHAIN
Set the propagation delay on the DQSBUS signal from the DQS pin. This is an advanced option that
should be used only after you have compiled a project, checked the I/O timing, and determined that the
timing is unsatisfactory. For detailed information on how to use this option, refer to the data sheet for the
device family. This option is ignored if it is applied to anything other than a DQ pin.
Type
Integer
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
This assignment supports Fitter wildcards.
Syntax
set_instance_assignment -name DQSOUT_DELAY_CHAIN -to <to> -entity <entity
name> <value>
512 DQSOUT_DELAY_CHAIN
MNL-Q21005
2015.05.04
Altera Corporation Quartus Settings File Reference Manual
Send Feedback