Altera Quartus II Settings File - Manual (Page 1315)

SIMULATION_VECTOR_COMPARE_RULE_FOR_Z
Specifies vector values that match with expected high impedance value (Z) in the waveform file
Type
String
Device Support
This setting can be used in projects targeting any Altera device family.
Syntax
set_global_assignment -name SIMULATION_VECTOR_COMPARE_RULE_FOR_Z <value>
MNL-Q21005
2015.05.04
SIMULATION_VECTOR_COMPARE_RULE_FOR_Z 1315
Quartus Settings File Reference Manual Altera Corporation
Send Feedback