Unused_tsd_pins_gnd – Altera Quartus II Settings File User Manual
Page 782
UNUSED_TSD_PINS_GND
If this option is turned on, unused temperature sensing diode (TSD) pins, TEMPDIODEp/
TEMPDIODEn, on the device are automatically set to GND in the Pin-Out File (.pin) file. By default, the
TSD pins are available for connection to an external temperature sensing device; however, you must
manually connect the pins to GND if they are not connected. Turning on this option only updates the
information in the .pin file, it does not affect FPGA behavior.
Type
Boolean
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
None
Syntax
set_global_assignment -name UNUSED_TSD_PINS_GND <value>
Default Value
Off
782
UNUSED_TSD_PINS_GND
MNL-Q21005
2015.05.04
Altera Corporation
Quartus Settings File Reference Manual