Altera Quartus II Settings File - Manual (Page 138)

NUMBER_OF_SWEPT_NODES_REPORTED
Allows you to specify the maximum number of swept nodes that the Synthesis Report displays. A swept
node is any node which was eliminated from your design because the Quartus II software found the node
to be unnecessary.
Type
Integer
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
This assignment is included in the Analysis & Synthesis report.
Syntax
set_global_assignment -name NUMBER_OF_SWEPT_NODES_REPORTED <value>
Default Value
5000
Example
set_global_assignment -name NUMBER_OF_SWEPT_NODES_REPORTED 200
138 NUMBER_OF_SWEPT_NODES_REPORTED
MNL-Q21005
2015.05.04
Altera Corporation Quartus Settings File Reference Manual
Send Feedback