Altera Quartus II Settings File - Manual (Page 464)

CRC_ERROR_CHECKING
Specifies error detection CRC usage for the selected device. If error detection CRC is turned on, the device
checks the validity of the programming data in the device. Any changes in the data while the device is in
operation generates an error.
Old Name
STRATIX_CRC_ERROR_CHECKING, YEAGER_CRC_ERROR_CHECKING
Type
Boolean
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
None
Syntax
set_global_assignment -name CRC_ERROR_CHECKING <value>
Default Value
Off
Example
set_global_assignment -name CRC_ERROR_CHECKING ON
See Also
ERROR_CHECK_FREQUENCY_DIVISOR CRC_ERROR_OPEN_DRAIN
464 CRC_ERROR_CHECKING
MNL-Q21005
2015.05.04
Altera Corporation Quartus Settings File Reference Manual
Send Feedback