Flex10k_jtag_user_code – Altera Quartus II Settings File User Manual
Page 222
Advertising
FLEX10K_JTAG_USER_CODE
Specifies user-defined information about the target device. The JTAG user code is an extension of the
option register. This data can be read with the JTAG USERCODE instruction.
Type
String
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
None
Syntax
set_global_assignment -name FLEX10K_JTAG_USER_CODE <value>
Default Value
7F
222
FLEX10K_JTAG_USER_CODE
MNL-Q21005
2015.05.04
Altera Corporation
Quartus Settings File Reference Manual
Advertising