Enable_configuration_pins – Altera Quartus II Settings File User Manual
Page 527
Advertising
ENABLE_CONFIGURATION_PINS
Enables major configuration pins, nCONFIG, nSTATUS, and CONF_DONE pin in user mode. If this
option is turned off, the nCONFIG, nSTATUS, and CONF_DONE pins are disabled when the device
operates in user mode and is available as a user I/O pin.
Type
Boolean
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
None
Syntax
set_global_assignment -name ENABLE_CONFIGURATION_PINS <value>
Default Value
On
Example
set_global_assignment -name ENABLE_CONFIGURATION_PINS ON
MNL-Q21005
2015.05.04
ENABLE_CONFIGURATION_PINS
527
Quartus Settings File Reference Manual
Altera Corporation
Advertising