Altera Quartus II Settings File - Manual (Page 907)

PARTITION_ALWAYS_USE_QXP_NETLIST
Specifies whether to always use the netlist in the QXP file associated with the partition, either because the
QXP file is imported into the partition, or is specified as a source file for the partition. Setting defaults to
off.
Type
Boolean
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
This assignment is not copied when you create a companion revision for HardCopy II devices.
Syntax
set_global_assignment -name PARTITION_ALWAYS_USE_QXP_NETLIST -entity
<entity name> -section_id <section identifier> <value>
set_instance_assignment -name PARTITION_ALWAYS_USE_QXP_NETLIST -to <to> -
entity <entity name> -section_id <section identifier> <value>
Default Value
Off, requires section identifier and entity name
MNL-Q21005
2015.05.04
PARTITION_ALWAYS_USE_QXP_NETLIST 907
Quartus Settings File Reference Manual Altera Corporation
Send Feedback