Altera Quartus II Settings File - Manual (Page 1217)

READ_OR_WRITE_IN_BYTE_ADDRESS
Determines whether to read or write Hexadecimal(.hex) File in byte addressable mode for this project.
Type
Enumeration
Values
• Off
• On
• Use global settings
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
None
Syntax
set_global_assignment -name READ_OR_WRITE_IN_BYTE_ADDRESS <value>
Default Value
Use global settings
MNL-Q21005
2015.05.04
READ_OR_WRITE_IN_BYTE_ADDRESS 1217
Quartus Settings File Reference Manual Altera Corporation
Send Feedback