Altera Quartus II Settings File - Manual (Page 661)

OUTPUT_DELAY_CHAIN
Specifies the propagation delay for Output Delay Chain. This is an advanced option that should be used
only after you have compiled a project, checked the I/O timing, and determined that the timing is
unsatisfactory. For detailed information on how to use this option, refer to the data sheet for the device
family. This option is ignored if it is applied to anything other than an output or bidirectional pin.
Old Name
OUTPUT_DELAY
Type
Integer
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
This assignment supports Fitter wildcards.
Syntax
set_instance_assignment -name OUTPUT_DELAY_CHAIN -to <to> -entity <entity
name> <value>
MNL-Q21005
2015.05.04
OUTPUT_DELAY_CHAIN 661
Quartus Settings File Reference Manual Altera Corporation
Send Feedback