D6_oct_delay – Altera Quartus II Settings File User Manual
Page 486
D6_OCT_DELAY
Specifies the propagation delay for D6 OCT Delay Cell. This is an advanced option that should be used
only after you have compiled a project, checked the I/O timing, and determined that the timing is
unsatisfactory. For detailed information on how to use this option, refer to the data sheet for the device
family. This option is ignored if it is applied to anything other than an input or bidirectional pin.
Old Name
T10_OCT_DELAY
Type
Integer
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
This assignment supports Fitter wildcards.
Syntax
set_instance_assignment -name D6_OCT_DELAY -to <to> -entity <entity name>
<value>
486
D6_OCT_DELAY
MNL-Q21005
2015.05.04
Altera Corporation
Quartus Settings File Reference Manual