Max7000_use_checksum_as_usercode – Altera Quartus II Settings File User Manual
Page 233
Advertising
MAX7000_USE_CHECKSUM_AS_USERCODE
Sets the JTAG user code to match the checksum value of the device programming file. The programming
file is a Programmer Object File (.pof) for non-volatile devices, such as MAX II devices, or an SRAM
Object File (.sof) for SRAM-based devices. If you turn this option on, the JTAG user code option is not
available.
Type
Boolean
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
This assignment is included in the Fitter report.
Syntax
set_global_assignment -name MAX7000_USE_CHECKSUM_AS_USERCODE <value>
Default Value
Off
MNL-Q21005
2015.05.04
MAX7000_USE_CHECKSUM_AS_USERCODE
233
Quartus Settings File Reference Manual
Altera Corporation
Advertising