Reserve_rdynbusy_after_configuration – Altera Quartus II Settings File User Manual
Page 725
RESERVE_RDYNBUSY_AFTER_CONFIGURATION
Specifies how the RDYnBUSY pin should be used when the device is operating in user mode after
configuration is complete. Depending on the current device and configuration scheme, the RDYnBUSY
pin can be reserved as a regular I/O pin, as an input that is tri-stated, as an output that drives ground, or
as an output that drives an unspecified signal. If this pin is reserved as a regular I/O pin, the RDYnBUSY
pin can be used as an ordinary I/O pin after configuration.
Type
Enumeration
Values
• As input tri-stated
• As output driving an unspecified signal
• As output driving ground
• Use as regular IO
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
None
Syntax
set_global_assignment -name RESERVE_RDYNBUSY_AFTER_CONFIGURATION <value>
Default Value
Use as regular IO
MNL-Q21005
2015.05.04
RESERVE_RDYNBUSY_AFTER_CONFIGURATION
725
Quartus Settings File Reference Manual
Altera Corporation