Altera Quartus II Settings File - Manual (Page 618)

IO_12_LANE_INPUT_STROBE_DELAY_CHAIN
Specifies the propagation delay for IO_12_LANE Input Strobe Delay Chain. This is an advanced option
that should be used only after you have compiled a project, checked the I/O timing, and determined that
the timing is unsatisfactory. For detailed information on how to use this option, refer to the data sheet for
the device family. This option is ignored if it is applied to anything other than an input or bidirectional
pin.
Old Name
IO_12_LANE_INPUT_STROBE_DELAY
Type
Integer
Device Support
This setting can be used in projects targeting any Altera device family.
Notes
This assignment supports Fitter wildcards.
Syntax
set_instance_assignment -name IO_12_LANE_INPUT_STROBE_DELAY_CHAIN -to <to> -
entity <entity name> <value>
set_instance_assignment -name IO_12_LANE_INPUT_STROBE_DELAY_CHAIN -from
<from> -to <to> -entity <entity name> <value>
618 IO_12_LANE_INPUT_STROBE_DELAY_CHAIN
MNL-Q21005
2015.05.04
Altera Corporation Quartus Settings File Reference Manual
Send Feedback