Canon imageCLASS LBP674Cdw Wireless Color Laser Printer User Manual
Page 186
* Even if [On] is selected, data is printed using 1-color black (K) toner, depending on the setting of [Output
Profile] or [Pure Black Text].
[Output Profile]
Select the appropriate profile for the print data. For details about the settings, see the following:
[Matching Method]
Select the element to be prioritized when adjusting the color with [RGB Source Profile]. For details about the
settings, see the following:
[Composite Overprint]
Specify whether to overprint CMYK data set for overprinting, as composite output.
Specifying [Off] in this setting prints the image as if overprinting were not specified.
* Overprinting with special colors is not used, even if [On] is specified here.
[Grayscale Conversion]
Specify the conversion method when printing color data in black and white. For details about the settings, see
the following:
[Grayscale Conversion](P. 356)
[Print Quality]
Adjust the print quality, such as the density and resolution, according to the document and purpose of printing.
[Density]
Adjust the toner density for each color during printing.
For more precise adjustment, you can adjust the levels of the three density areas for each color in [Fine
Adjust].
* When [Toner Save] is set to [On], you cannot adjust the toner density.
[Toner Save]
Specify whether to print while saving toner.
To print after checking the layout and appearance, such as before printing a large job, select [On].
[Gradation]
Specify the processing method used to reproduce gradation.
When you select [High 2], printing is performed with finer gradation than with [High 1].
* This setting is only available when [Resolution] is set to [600 dpi].
[Density Fine Adjustment]
Adjusts the density of fine lines and small text. Adjusts the density when fine lines or small text is faded to
give less faded print.
* Adjusting the density also affects the color balance and objects other than lines and text.
* This setting is only available when [Resolution] is set to [1200 dpi].
[Resolution]
Specify the resolution to be used for print data processing.
To print with a higher resolution, specify [1200 dpi] in this setting.
[Special Smoothing Mode]
Specify the mode to print data with a smooth finish. For details about the settings, see the following:
[Special Smoothing Mode](P. 342)
[Toner Volume Correction]
Adjusts the toner volume for data such as text and lines so as not to exceed the limit value of the machine.
For details about the settings, see the following:
[Toner Volume Correction](P. 343)
[Line Control]
Specify the processing method used to reproduce lines. For details about the settings, see the following:
Printing
178