Canon imageCLASS LBP674Cdw Wireless Color Laser Printer - Manual (Page 482)

A Message Appears
95W3-0AU
If a message appears on the operation panel, select the message from the list below, and check how to troubleshoot
the problem.
Black & White printing is restricted. Only Color printing is available.(P. 475)
Cannot analyze the authentication server certificate.(P. 475)
Cannot find the access point.(P. 475)
Cannot print. A non-Canon or counterfeit cartridge may be inserted.(P. 476)
Cannot print RX data.(P. 476)
Cannot recognize the image.(P. 476)
Cartridge communication error. Cannot print. A non-Canon or counterfeit cartridge may be inserted.
(P. 477)
Cartridge Communication Error Problems resulting from the use of non-Canon cartridges are not covered
under the warranty.(P. 477)
Change the authentication password.(P. 477)
Check the authentication settings.(P. 477)
Color printing is restricted. Only Black & White printing is available.(P. 477)
Could not connect.(P. 478)
Could not connect. Check the encryption key.(P. 478)
Could not connect. The maximum number of devices that can connect to the access point has been
reached.(P. 478)
Could not connect using Easy Connection via PC. The device will restart.(P. 478)
Could not connect using the wireless LAN. Turn the main power OFF and ON, then configure the settings
again.(P. 479)
Could not connect using WPS. Wait a moment, then configure the settings again.(P. 479)
Could not detect any connections from wireless devices.(P. 479)
Could not perform cleaning.(P. 480)
Could not perform correction.(P. 480)
Could not perform IEEE 802.1X authentication. Cannot analyze the authentication server certificate.
(P. 480)
Could not perform IEEE 802.1X authentication. Change the authentication password.(P. 480)
Could not perform IEEE 802.1X authentication. Check the authentication settings.(P. 480)
Could not perform IEEE 802.1X authentication. Configure the correct authentication information.(P. 480)
Could not perform IEEE 802.1X authentication. Configure the information required for authentication.
(P. 481)
Could not perform IEEE 802.1X authentication. No reply from the destination.(P. 481)
Could not perform IEEE 802.1X authentication. The authentication server certificate has expired.(P. 481)
Could not perform IEEE 802.1X authentication. The authentication server certificate is incorrect.(P. 481)
Could not perform Open System authentication. Check the encryption key settings.(P. 481)
Could not perform Shared Key authentication. Check the encryption key settings.(P. 482)
Direct Connection terminated.(P. 482)
Easy Connection via PC ended due to timeout The device will restart.(P. 482)
End of Cartridge Lifetime(P. 482)
ITB is near end of lifetime. Replcmt. is not yet needed.(P. 483)
Load paper.(P. 483)
Low Cartridge Level(P. 483)
Memory Full (Secure Print)(P. 483)
Memory Full (Skip Error)(P. 484)
Memory Media Print is restricted.(P. 484)
No reply from the destination.(P. 484)
No response from the host.(P. 484)
Paper jammed.(P. 484)
Troubleshooting
474