Canon imageCLASS LBP674Cdw Wireless Color Laser Printer - Manual (Page 338)

Specify whether to prioritize the print speed or limit the use of the color toner cartridges when printing
documents that include both black and white and color.
● To prioritize the print speed, specify [Mode 1] in this setting.
● To limit the use of color toner cartridges, specify [Mode 2] in this setting.
[ Mode 1 ]
[Mode 2]
[Rdc. Faint Print After Rplc. Cart.]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Print may be faded immediately after installing a new replacement toner cartridge. If so, specifying [On] in this setting
may improve the print results. This setting takes effect the next time a toner cartridge is replaced.
* Specifying [On] will result in a longer delay than usual between replacing toner cartridges and being able to print.
[ Off ]
[On]
[Correct Paper Conveyance]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Continuous printing may result in repeated paper jams. In this case, selecting [On] may reduce the frequency of paper
jams.
* When you select [On], the printing speed may decrease.
[ Off ]
[On]
[ITB Cleaning Frequency]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
If the printed paper is partly smudged, selecting [High] may improve the print results.
* When you select [High], the printing speed may decrease.
[ Standard ]
[High]
[Prevent Printing Noise]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
During black and white printing, the machine may make a sound as if there is friction. In this case, selecting [Mode 1]
may reduce the sound. If that does not work, select [Mode 2].
* When this setting is enabled, the printing speed may decrease.
[ Off ]
[Mode 1]
Settings Menu Items
330