Prepare cartridge, Printing is restricted – Canon imageCLASS LBP674Cdw Wireless Color Laser Printer User Manual
Page 493
●
Change the paper size setting on the operation panel to match the size of the loaded paper.
Setting the Paper Size and Type for the Paper Drawer(P. 123)
Setting the Paper Size and Type for the Multi-purpose Tray(P. 125)
●
When printing from a computer, change the paper size setting on the printer driver to match the size of
the loaded paper. Printing from a Computer(P. 161)
When Reloading Paper
Load paper of the size set on the operation panel or printer driver. Loading Paper(P. 109)
Check That the Paper Guides Are Aligned with the Markings and Are Not Too Loose or Too Tight.
Paper Drawer
Multi-purpose Tray
Prepare cartridge.
It is nearing the time to replace the toner cartridges.
Prepare New Toner Cartridges, and Replace the Old Ones, as Needed.
When printing large jobs, it is recommended to replace the toner cartridges. Replacing the Toner
To Continue Printing, Use the Procedure Below.
When I-Faxing
When receiving an I-Fax, the data may be saved to the memory of the machine without being printed to
prevent printing text that is difficult to read or images that are difficult to see.
To continue printing, enable [Continue Printing When Amount in Cartridge Is Low].
Log in to Remote UI [Settings/Registration] [RX/Forwarding Settings] or [RX Settings] [Common
Settings] [Edit] in [Common Settings] select the [Continue Printing When Amount in Cartridge Is
Low] checkbox [OK]
On the operation panel, select [Menu] in the [Home] screen, and then select [Function Settings] to
configure the settings. [Continue Print. When Cart. Low](P. 361)
* When this setting is enabled, the printing results may be light or faded.
●
You can manually specify when this message appears (when toner is low). [Display Timing for Cart.
Prep.](P. 299)
Printing is restricted.
Printing is restricted due to Department ID Management.
Log In with a Department ID That Does Not Restrict Printing.
For the Department ID and PIN, contact the system administrator.
Troubleshooting
485