Canon imageCLASS LBP674Cdw Wireless Color Laser Printer - Manual (Page 281)

Starting Remote UI
95W3-067
To use Remote UI, enter the IP address of the machine into a Web browser on a computer, and log in with System
Manager Mode or General User Mode. The functions available with Remote UI vary depending on the mode you
logged in to.
When Department ID Management is set up, you must log in with the Department ID. The mode to which you are
logging in varies depending on the System Manager ID settings.
Required Preparations
● Check the operating environment of Remote UI. Supported Environment(P. 35)
● Connect the computer you are using to operate Remote UI to the machine over a network. Setting Up the
Network(P. 44)
● Check the IP address of the machine. Checking the Network Status and Settings(P. 77)
When Department ID Management Is Not Set Up
● To log in with Remote UI, you must set the Remote UI Access PIN on the machine. Setting the PIN to Use
for Remote UI(P. 257)
When Logging in with System Manager Mode
● To log in with System Manager Mode (System Manager ID), you must first change the System Manager PIN
from the default setting. Setting the Department ID and PIN for the Administrator(P. 207)
1
From a Web browser on a computer, access the following URL.
http://<IP address of the machine>/
➠ The Remote UI login screen appears.
When Remote UI communication is encrypted, a warning message about the security certificate may
appear. If there are no problems with the certificate or TLS settings, you can continue operations.
When entering an IPv6 address, enclose the IP address in brackets [ ].
Example:
http://[fe80:2e9e:fc ff :fe4e:dbce]/
If the Remote UI Login Screen Is Not Displayed
When a message such as [Cannot access Remote UI.] is displayed and the login screen is not displayed, see
the following:
Cannot Access Remote UI(P. 469)
2
Enter the items required for login.
Managing the Machine
273