Canon imageCLASS LBP674Cdw Wireless Color Laser Printer User Manual
Page 65
* When you select this authentication method, an authentication error occurs when connected to a
wireless LAN router that uses a shared key. The machine setting changes to [Shared Key] at this time, and
an attempt to reconnect to the router is made.
[Shared Key]
Uses an encryption key for the password.
3
Select an encryption key that is not registered, and press [Register].
➠
The encryption key input screen is displayed.
4
Enter the network key, and press [Apply].
➠
The encryption key is registered to the [Select Encryption Key] screen.
5
Select a registered encryption key, and press [Connect].
When Using WPA-PSK or WPA2-PSK
1
Press [WPA/WPA2-PSK].
➠
The [WPA/WPA2 Encryption Method] screen is displayed.
2
Select the encryption method.
➠
The encryption key input screen is displayed.
When you select [Auto], AES-CCMP or TKIP is set automatically according to the wireless LAN router to
which you want to connect.
3
Enter the network key, and press [Apply].
When Using WPA-EAP or WPA2-EAP
Press [WPA/WPA2-EAP] [OK].
When Not Using a Security Standard
Press [None].
6
When [Connected.] is displayed on the operation panel, press [Close].
➠
When the machine is connected to the wireless LAN, [
] appears on the [Home] screen and screen of
each function.
7
Wait a few minutes.
➠
By default, an IP address is set automatically.
To use a specific IP address, set this manually.
Setting Up
57