Canon imageCLASS LBP674Cdw Wireless Color Laser Printer - Manual (Page 357)

[Recovery Printing]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify whether to resume printing from the page where an error that stops printing occurred after the error is
resolved.
* When [Off] is selected, the page where the error occurred is not printed. Printing resumes from the next page, but it
may resume two pages later when using 2-sided printing and depending on when the error occurred.
[Off]
[
On ]
[UFR II]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify the print data processing method used when the UFR II Printer Driver is used.
[Halftones]
[Menu] [Function Settings] [Printer] [Printer Settings] [UFR II]
Specify the print method used to reproduce halftones (intermediate areas between light and dark areas)
according to the print data content.
To Print Data with Fine Lines and Small Text (such as CAD Data)
Set [Error Diffusion] to [On].
* Only applicable if [Resolution] is set to [600 dpi]. [Resolution](P. 342)
* Specifying [On] in this setting may lower the stability of toner fixing and textures.
To Print Other Data Types
Set [Error Diffusion] to [Off] and specify the respective halftone reproduction method in [Resolution/
Gradation]. This can be set separately for text, graphics (lines or figures), and images (photos).
● Specify [Resolution] for high-resolution printing where text outlines are clear. Suitable for printing data
with text and fine lines.
● Specify [Gradation] for smooth printing of tones and outlines. Suitable for printing data such as figures
that use gradations.
[Error Diffusion]
[ Off ]
[On]
[Resolution/Gradation]
*1
[Text]
[ Resolution ]
[Gradation]
[Graphics]
[Resolution]
[
Gradation ]
[Image]
[Resolution]
[
Gradation ]
Settings Menu Items
349