Canon imageCLASS LBP674Cdw Wireless Color Laser Printer - Manual (Page 300)

When the Settings Menu Is Initialized
When any of the following is initialized, restart the machine to apply the initialized settings. Restarting the
Machine(P. 88)
● [Preferences]
● [Function Settings]
● [Management Settings]
● [Network Settings]
When Initializing a Key and Certificate
● Functions using a key and certificate such as TLS or IKE of IPSec are disabled. To use these functions again,
you must set the key and certificate, and then enable the function.
When [Management Settings] of the Settings Menu Is Initialized
● This also initializes the Remote UI Access PIN. To use Remote UI, you must set the Remote UI Access PIN
again. Setting the PIN to Use for Remote UI(P. 257)
Initializing All Settings and Data
Use the operation panel to initialize all settings and data. You cannot initialize these using Remote UI from a computer.
Administrator privileges are required. When these are initialized, the machine restarts automatically.
● Before initialization, check that there is no data being processed or waiting to be processed. This data is
deleted when the initialization is performed.
1
On the operation panel, press [Menu] in the [Home] screen. [Home] Screen(P. 95)
2
Press [Management Settings] [Initialize All Data/Settings].
➠ The initialization confirmation screen is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then press [Log In]. System
Manager ID and PIN(P. 9)
3
Press [Yes] [Yes].
➠ All settings and data are initialized.
When initialization is complete, the machine restarts automatically.
Managing the Machine
292