Show qos maps, W qos maps – Brocade Network OS Command Reference v4.1.0 User Manual
Page 1005
Network OS Command Reference
967
53-1003115-01
show qos maps
2
show qos maps
Displays information on the defined QoS maps.
Synopsis
show qos maps [cos-mutation [name] | cos-traffic-class [name]]
Operands
cos-mutation name
Specifies to report on only the named CoS-to-CoS mutation QoS map.
cos-traffic-class name
Specifies to report on only the named CoS-to-Traffic Class QoS map.
Defaults
Report shows all defined QoS maps.
Command Modes
Privileged EXEC mode
Description
Use this command to display information on the QoS defined maps. For each QoS map, the
configuration state is displayed with a list of all interfaces bound to the QoS map.
Usage Guidelines
None
Examples
To display information on the defined QoS maps:
switch# show qos maps
CoS-to-CoS Mutation map 'test'
In-CoS:
0
1
2
3
4
5
6
7
--------------------------------
Out-CoS:
0
1
2
3
5
4
6
7
Enabled on the following interfaces:
Te 0/5
CoS-to-Traffic Class map 'test'
Out-CoS:
0
1
2
3
4
5
6
7
-------------------------------------
TrafficClass:
0
1
2
3
5
4
6
7
Enabled on the following interfaces:
Te 0/5
See Also