Brocade Network OS Command Reference v4.1.0 - Manual (Page 988)

950 Network OS Command Reference
53-1003115-01
show port-profile domain
2
show port-profile domain
Displays the status of Automatic Migration of Port Profiles (AMPP) profiles and port-profile
domains.
Synopsis show port-profile [port-profile-name] | domain port-profile-domain-name] [status | activated |
applied] | associated]
Operands port-profile-name The name of a port-profile.
domain Enables specification of a port-profile domain name.
port-profile-domain-name
Name of a port-profile domain.
status Enables selection of status type.
activated Specifies all port-profiles with the activated status.
applied Specifies all port-profiles with the applied status.
associated Specifies all port-profiles with the associated status.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the status of an AMPP port-profile or port-profile domain.
Usage Guidelines Enter show port-profile status to display the status of all AMPP profiles.
If no option is specified, then all port-profiles that match the criteria are shown.
Examples The following example shows the status of all port-profiles:
switch# show port-profile status
Port-Profile PPID Activated Associated MAC Interface
auto-dvPortGroup-2 1 Yes 0050.5681.2ed5 none
0050.5699.5524 te0/2
0050.5699.39e0 te0/1
auto-dvPortGroup-1 2 Yes 0050.5681.083c none
The following example shows the status of a port-profile domain:
switch# show port-profile domain vDC1_Domain status
Port-Profile PPID Activated Associated MAC Interface
Tenant1_PP 1 No None None
Tenant2_PP 2 No None None
See Also show running-config,show running-config port-profile-domain, show port-profile,
show port-profile interface