Brocade Network OS Command Reference v4.1.0 - Manual (Page 1106)

1068 Network OS Command Reference
53-1003115-01
show running-config interface tengigabitethernet mtu
2
show running-config interface tengigabitethernet mtu
Displays the configured MTU for a 10 gigabit Ethernet interface.
Synopsis show running-config interface tengigabitethernet [rbridge-id/slot/port] mtu
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the configured MTU for the specified 10-gigabit Ethernet interface.
Usage Guidelines None
Examples
switch# show running-config interface tengigabitethernet 1/0/49 mtu
interface tengigabitethernet 1/0/49
mtu 2500
See Also ip mtu