Brocade Network OS Command Reference v4.1.0 - Manual (Page 1264)

1226 Network OS Command Reference
53-1003115-01
snmp-server engineid local
2
snmp-server engineid local
Configures a user-defined engine ID for the SNMP agent.
Synopsis snmp-server engineid local engine_id
no snmp-server engineid local
Operands engine_id Specifies the ID of the engine.
Defaults None
Command Modes Global configuration mode (for a standalone switch), RBridge ID configuration mode (for VCS
mode).
Description Use this command to configure a user-defined engine ID for the SNMP agent.
Usage Guidelines A switch reboot is necessary for the configured engine ID to become active. Enter the no
snmp-server engineid local command to remove the configured engine ID from database.
Examples To configure a user-defined engine ID for the SNMP agent in standalone mode:
switch(config)# snmp-server engineid local 10:20:30:40:50:60:70:80:90:10:30:12
To configure a user-defined engine ID for the SNMP agent in VCS mode:
switch (config-rbridge-id-152)# snmp-server engineid local
10:00:00:05:33:51:A8:65:05:33:51:A8
To remove the configured engine ID from the database:
switch(config)# no snmp-server engineid local
switch (config-rbridge-id-152)# no snmp-server engineid local
See Also show running-config snmp-server, show running-config snmp-server engineid,
snmp-server community, snmp-server contact, snmp-server location, snmp-server user,
snmp-server v3host, snmp-server context