Brocade Network OS Command Reference v4.1.0 User Manual
Page 1075
Network OS Command Reference
1037
53-1003115-01
show running-config interface gigabitethernet channel-group
2
show running-config interface
gigabitethernet channel-group
Displays channel group configuration information for an interface participating in link aggregation.
Synopsis
show running-config interface gigabitethernet [rbridge-id/slot/port] channel-group [mode | type]
Operands
rbridge-id
Specifies a switch by its RBridge ID.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
mode
Displays the mode of link aggregation (active, passive, or on).
type
Displays the type of link aggregation (802.3ad standards-based LAG, or
Brocade proprietary hardware-based trunking).
Defaults
None
Command Modes
Privileged EXEC mode
Description
Use this command to display information about the channel group configuration of the specified
Ethernet interface.
Usage Guidelines
This command is relevant only to interfaces configured as part of a LAG.
This command can be used only on Brocade VDX 6710, Brocade VDX 8770-4, and
Brocade VDX 8770-8 switches.
Examples
None
See Also