Show license id – Brocade Network OS Command Reference v4.1.0 User Manual
Page 946
908
Network OS Command Reference
53-1003115-01
show license id
2
show license id
Displays the RBridge License ID.
Synopsis
show license id [rbridge-id {rbridge-id |all}] [all]
Operands
rbridge-id
Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id
Specifies a unique identifier for a node.
all
Specifies all identifiers for a node.
all
Executes the command on all switches in the fabric.
Defaults
Displays the license ID installed on the local switch.
Command Modes
Privileged EXEC mode
Description
Use this command to display the RBridge license ID (WWN) for the specified switch. You need the
RBridge license ID when you prepare to add a license.
Usage Guidelines
In the Network OS v3.0.0 release, this command is supported only on the local RBridge.
In logical chassis cluster mode, remote license operations may be performed on any remote
RBridge, from any RBridge in the logical chassis cluster.
Examples
To display the license ID for the local switch:
switch# show license id
Rbridge-Id
LicenseId
========================================
2
10:00:00:05:1E:00:4C:80
See Also