Brocade Network OS Command Reference v4.1.0 User Manual
Page 1114
1076
Network OS Command Reference
53-1003115-01
show running-config interface tengigabitethernet udld
2
show running-config interface tengigabitethernet udld
Displays Unidirectional Link Detection Protocol (UDLD) configuration information for a 10 Gigabit
Ethernet interface.
Synopsis
show running-config interface tengigabitethernet [rbridge-id/slot/port] udld enable
Operands
rbridge-id
Specifies a switch by its RBridge ID.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
enable
Indicates whether UDLD is enabled on the interface.
Defaults
This command has no defaults.
Command Modes
Privileged EXEC mode
Description
Use this command to display Unidirectional Link Detection Protocol (UDLD) configuration
information for the specified interface.
Usage Guidelines
None
Examples
None
See Also
None