Brocade Network OS Command Reference v4.1.0 - Manual (Page 661)

Network OS Command Reference 623
53-1003115-01
rfc1583-compatibility (OSPF)
2
rfc1583-compatibility (OSPF)
Configures compatibility with RFC 1583.
Synopsis rfc1583-compatibility
no rfc1583-compatibility
Operands None
Defaults OSPF is compatible with RFC 1583 (OSPFv2).
Command Modes OSPF VRF router configuration mode
Description Use this command to enable or disable compatibility with RFC 1583. OSPF is compatible with
RFC 1583 (OSPFv2) and maintains a single best route to an autonomous system (AS) boundary
router in the OSPF routing table. Disabling this compatibility causes the OSPF routing table to
maintain multiple intra-AS paths, which helps prevent routing loops.
Usage Guidelines Enter no rfc1583-compatibility to disable compatibility with RFC 1583.
Examples To disable compatibility with RFC 1583:
switch# configure
switch(config)# rbridge-id 5
switch(config-rbridge-id-5)#router ospf
switch(config-router-ospf-vrf-default-vrf)# rfc1583-compatibility
See Also None