Brocade Network OS Command Reference v4.1.0 User Manual
Page 1053
Advertising
Network OS Command Reference
1015
53-1003115-01
show running-config interface fortygigabitethernet cee
2
show running-config interface fortygigabitethernet cee
Displays whether the default CEE map has been applied to a 40-gigabit Ethernet interface.
Synopsis
show running-config interface fortygigabitethernet [rbridge-id/slot/port] cee
Operands
rbridge-id
Specifies a switch by its RBridge ID.
slot
Specifies a valid slot number.
port
Specifies a valid port number.
Defaults
None
Command Modes
Privileged EXEC mode
Description
Use this command to determine whether the default CEE map has been applied to a 40-gigabit
Ethernet interface.
Usage Guidelines
This command does not apply to ISL ports.
Examples
None
See Also
Advertising